Hallo,
da ich bald mal Getrieböl wechseln möchte hab ich mal wieder ein bisserl kombiniert als ich die gute alte Aufsatzpumpe für die Bohrmaschine wiedergefunden habe
<img src="http://www.kd-modelltechnik.de/sonstige ... lpumpe.jpg">
Funktioniert einwandfrei sobald die Pumpe mal Öl "geschluckt" hat.
Gruß
Dieter
Getriebeölwechsel -aus der Rubrik " Basteln mit Dieter
Moderatoren: eniac, Robi, xaver133
Yes, totally correct ....its 85W90. Sorry for my english -scool was long time ago
20minutes ago i changed all the transmission oils with the pump what you can see on the picture. Per 2Litres it takes about a half minute. Also I had problems to fill in at the two axle transmission (front and rear) per filler hole ...so I test to fill in at the controll holes -that was the right way ....no oiled arms
regards
Dieter
20minutes ago i changed all the transmission oils with the pump what you can see on the picture. Per 2Litres it takes about a half minute. Also I had problems to fill in at the two axle transmission (front and rear) per filler hole ...so I test to fill in at the controll holes -that was the right way ....no oiled arms
regards
Dieter